Home›Actuators›SBA60 belt actuators (NEMA 23)›SBAC 60 365mm Motor Down Servo Absolute Encoder
SBA60 belt actuators (NEMA 23)

SBAC 60 365mm Motor Down Servo Absolute Encoder

SBAC 60 365mm Motor Down Servo Absolute Encoder is a SBA60 belt actuator with 365 mm of travel, a NEMA 23 servo motor and an absolute encoder. List price $1,350, 2-3 weeks lead time.

Travel
365 mm
Max speed
1500 mm/s
Motor
NEMA 23 servo
Mount
Motor Down
Drive
Toothed belt
Encoder
Absolute (homing-free)
Lead time
2-3 weeks
List price
$1,350

Why an absolute encoder

SBAC 60 365mm Motor Down Servo Absolute Encoder is a linear actuator with an absolute encoder on the motor: the controller knows the carriage position the instant power comes on, so the axis never runs a homing cycle, verifies every move against commanded position, and stops on a stall instead of silently losing steps. After an e-stop over a loaded deck it retracts from where it actually is. That is the difference between this part and the open-loop version of the same actuator, and it is why encoder actuators are specified on multi-axis gantries and lab automation. Read the encoder guide →

How the engine sizes it

Every build runs this actuator through the deterministic sizing engine: payload-at-speed against the family envelope, a 2× load safety factor as a hard gate, and the motor checked for at least 25% torque margin at your commanded speed on real torque-curve data (servo continuous curves at 48 V). Inertia mismatch above 10:1 triggers a computed gearbox remedy. The result ships with the math shown.

Ask for it by name in the engine, or describe the task and let the engine decide whether this is the right part — it will tell you if a smaller or larger variant fits better, and why.

Downloads

Technical bulletin (PDF) ↗STEP model — export from the engine ↗

Size and quote this part — free

Enter payload, travel, and speed. The engine confirms this part or recommends a better fit, builds the 3D assembly, selects the controller, and returns a validated quote.

Launch the engine →All SBA60 belt actuators (NEMA 23)