SBAC90 1275mm Motor Up Stepper 3:1 Gearbox with Brake
SBAC90 1275mm Motor Up Stepper 3:1 Gearbox with Brake is a SBA90 / SBAC90 belt actuator with 1275 mm of travel, a NEMA 34 stepper motor, a 3:1 planetary gearbox, an absolute encoder and an integral brake. List price $2,800, 6-8 weeks lead time.
Why an absolute encoder
SBAC90 1275mm Motor Up Stepper 3:1 Gearbox with Brake is a linear actuator with an absolute encoder on the motor: the controller knows the carriage position the instant power comes on, so the axis never runs a homing cycle, verifies every move against commanded position, and stops on a stall instead of silently losing steps. After an e-stop over a loaded deck it retracts from where it actually is. That is the difference between this part and the open-loop version of the same actuator, and it is why encoder actuators are specified on multi-axis gantries and lab automation. Read the encoder guide →
How the engine sizes it
Every build runs this actuator through the deterministic sizing engine: payload-at-speed against the family envelope, a 2× load safety factor as a hard gate, and the motor checked for at least 25% torque margin at your commanded speed on real torque-curve data (stepper pull-out curves at 24 V). Inertia mismatch above 10:1 triggers a computed gearbox remedy. The result ships with the math shown.
Ask for it by name in the engine, or describe the task and let the engine decide whether this is the right part — it will tell you if a smaller or larger variant fits better, and why.
Downloads
Size and quote this part — free
Enter payload, travel, and speed. The engine confirms this part or recommends a better fit, builds the 3D assembly, selects the controller, and returns a validated quote.